UKIRT
Show document only
UKIRT Home
Contact Info
OMP
UKIRT Staff wiki
Weather
Web Cameras
____________________

Survey Observing
Other Observing
Observing Tool Manual
Schedule
Applying For Time
Get UKIDSS Data
Get non-UKIDSS Data
Data Reduction
Acknowledge Us
Telescope
WFCAM
Cassegrain
Technical Reference
UKIRT Publications
Graphical Weather Server
EAO Safety Manual
UKIRT Waiver Form
TSS Priority Page
Introduction to CGS4

Introduction to CGS4

General Description of the Instrument

CGS4 is a 1-5um multi-purpose 2D grating spectrometer containing a 256x256 InSb array, installed in a cryostat which is cooled by liquid nitrogen and closed cycle coolers. Four gratings are available, two of which are installed in the cryostat at any one time. They are a  40 l/mm grating which provides resolving powers of 300-2000, a 75 l/mm grating which provides resolving powers of about 600-2000, a 150 l/mm grating which provides resolving powers of roughly 2000-6000, and a 31 l/mm echelle which provides a resolving power of about 20,000 (15 km/sec).  The 75 l/mm grating is rarely used thesedays. These resolving powers are achieved with the 150 mm focal length camera optics and a one-pixel-wide slit, which provide a scale of 1.22 arcsec/pixel for the two moderate resolution gratings and roughly 1.0x1.5 arcsec/pixel for the echelle (1.0 arcsec/pixel in the direction of the dispersion). A 300 mm focal length camera mirror sometimes is installed in place of the standard camera; with it pixel scales and wavelength coverages are halved and resolving powers are doubled (in principle).

CGS4 slit lengths are about 80-90 arcseconds. It is possible to orient a slit at any angle on the sky. Slit widths of one pixel (~1.23 arcsec with the standard camera, 0.61 arcsec with the long focal length camera), two, and four pixels are available. Since the resolution is matched to one pixel on the array, with the one-pixel wide slit fully- (or over-) sampled spectra must be obtained by mechanically shifting the array in the dispersion direction, while holding the grating fixed. The array may be "shifted" over two pixel widths; so that isolated bad pixels do not result in gaps in the spectrum.

For optimum noise performance and efficiency in short exposures either multiple non-destructive readout of the array (NDSTARE) or a single read mode (STARE) can be used. The array can also be read in synch with the chopper. Chopping often is employed when observing at medium resolution at thermal wavelengths (beyond the K window).

The instrument has a calibration unit, containing a black-body source for flat-fielding and argon, krypton, and xenon arc lamps for wavelength calibration. Five broad band filters continuously cover the wavelength band 0.95-5.4um. Longward of 1.3um, CVFs serve as order-blockers for the echelle. Shortward of 1.3um, narrow band filters (1.083um, 1.233um, 1.257um, 1.282um), allow echelle observations at important wavelengths. Spectropolarimetry is available with CGS4 at all wavelengths.

Software

The spectrometer is completely under computer control. The low-level (VAX) side of the control system is run-up and looked after by the telescope operator, the observer's interaction with the system is through the ORAC software as with the other UKIRT instruments. Instrument configurations and observing sequences are specified using ORAC-OT.

Further Information

Assistance with the CGS4 data acquisition and reduction systems, as well as other technical information are available on request. Contact persons are:
  • Your support scientist should be the first point of contact.
  • Paul Hirst, the CGS4 instrument scientist
Contact: Tom Kerr. Updated: Wed Oct 6 11:54:24 HST 2004

Return to top ^